|
| How To Use :
PL-650 Big PELA & PELA
Pro 14 Oil Extractors |
 |
1) Warm up the oil by running the engine. This will allow the
contaminates to mix and to suspend in the oil. Remove the dipstick.
Note: If you can't hold the dipstick comfortably in
your hands, then the oil is too hot! Wait for the oil to cool off a bit.
|
 |
2)
Select and insert the appropriate diameter extraction tube into the dipstick
pipe until it touches the bottom of the oil pan. Connect the main tube to the
top of the unit and to the extraction
tube.
|
 |
3)
Pump the handle
4 to 15 times in a row to start the vacuum. The unit will extract the oil automatically.
Continuous pumping is not required.
|
 |
4) After
all the oil has been extracted, press the release valve located at the top of
the unit for 5 seconds. Remove the main tube. When pouring the oil into a
container, hold the pump as in the photo and pour gently. Do not hold it upside
down ! Bring the used oil to
a recycling depot.
Note: No special cleaning is required on the unit. Just empty as much
oil as possible (do not store oil long term).
|
|
Note: Not for use on gasoline or other flammables. |
|
[ Home ] [ Up ] [ Applications ] [ Description ] [ Product Reviews ] [ Where To Buy - Contact Us ] |
®