|
|
 |
How
To Use: PELA 6000 & PELA 2000 Oil Extractor |
 |
1) Warm up the oil by running the engine. This
will allow the contaminates to mix and
suspend in the oil. Remove the dipstick.
Note: If the dipstick can't be held comfortably in
your hands, then the oil is too hot. Wait a bit!
Insert the extractor tube into the
dipstick pipe until it reaches the bottom of the oil pan. Firmly place the tube
cap onto the container.
|
 |
2) Attach the pump to the top of the container. |
 |
3) Pump 10 to 20 times in a row to create the
vacuum (5 to 10 times for PELA 2000) . Always use 2 hands. The unit
will automatically extract the old oil. Continuous pumping is not
required. |
 |
4) To stop extraction at any time,
pull the tube out of the fluid. |
 |
5) After all the oil has been
extracted, remove the tube cap from the container with a twisting motion. Remove the
pump. Empty gently into a container. Bring the used
oil to a recycling depot.
Note: No special cleaning is required on the unit. Just empty as much
oil as possible.
|
|
Note: Not for use with gasoline or other flammables.
|
|
[ Home ] [ Up ] [ Applications ] [ Description ] [ Product Reviews ] [ Where To Buy - Contact Us ] |
®